Is it Possible to Synchronize More Than 3 DL750 ScopeCorder?
Resources:
Yes, it is possible to synchronize more than 3 DL750 ScopeCorders by using the trigger signal, in a one-to-one connection method, as long as the limits of the delay time is not exceeded.
Example Configuration:
DL750 [TRIG OUT]――＞[TRIG IN] DL750 [TRIG OUT]――＞ [TRIG IN] DL750 [TRIG OUT]――＞[TRIG IN] DL750
For time sensitive applications, it is possible to connect the instruments as shown below. However, please shorten the wiring length between the DL750's as short as possible (for example, using T-adaptor).
DL750[TRIG OUT]―┐
├＞ [TRIG IN] DL750
├＞ [TRIG IN] DL750
├＞ [TRIG IN] DL750
└＞ [TRIG IN] DL750
├＞ [TRIG IN] DL750
├＞ [TRIG IN] DL750
├＞ [TRIG IN] DL750
└＞ [TRIG IN] DL750
The attached document explains the delay time in synchronized operation, which also applies to the DL750P and SL1400.
Related Products & Solutions
Data Acquisition (DAQ)
Simplify complex testing with DAQ systems that flex to your needs. Capture and analyze any physical or electrical signal with ease, transforming signals into actionable insights that speed innovation and improve reliability.
High Speed Data Acquisition
- PC-based, streaming, local or remote operation
- 20+ modules, isolated and versatile inputs
- Up to 200 MS/s or 640 ch
Isolated Oscilloscopes | ScopeCorders
- An integrated measurement system for every electromechanical application
- Modular platform combines oscilloscope and DAQ functionality
- Capture high-speed transients and low-speed trends
Oscilloscopes
Accelerate design and troubleshooting with oscilloscopes that combine high-speed sampling, long record lengths, and mixed-signal analysis. From quick debug to advanced R&D, Yokogawa oscilloscopes help you see deeper, work faster, and design smarter.
Top