The design, validation, and manufacturing of modern electronics necessitate the measurement of both analog and digital signals. Mixed signal oscilloscopes enable the simultaneous, time correlated observations and analysis of analog with digital (logic) signals, to establish causal relationships between the various areas of a device's electronics. They are purpose built tools for troubleshooting electrical anomalies, measuring parametric values, and monitoring cause and effect relationships between signals.
From our first digital oscilloscope in 1988 and over ten generations since, Yokogawa oscilloscopes have enabled engineers to maintain high sample rates for long observation periods with deep, segmented acquisition memory. Yokogawa oscilloscopes offer extensive signal analysis capabilities, dedicated analysis and decode of serial buses such as I2C, SPI, CAN, LIN, CXPI and FlexRay, improved ergonomics, and value.
8 channel mixed-signal oscilloscopes for every engineer in bandwidths of 350 MHz or 500 MHz. Best-in-class performance in usability, acquisition, analysis, and display.
Get enhanced productivity in a small footprint touchscreen oscilloscope. Design and validate advanced serial bus, power supply, and electromechanical systems with this feature-filled oscilloscope that can be configured at very affordable prices. Bandwidth from 200 MHz to 500 MHz for up to four low-noise input channels.
|Analog Channels||1 to 4||1 to 8|
|Logic Analyzer Channels||Up to 8||Up to 24|
|Bandwidths Available||200, 350, 500 MHz||350, 500 MHz|
|Sampling Rate||Max 2.5 GSa/sec||Max 2.5 GSa/sec|
|Record Length||Max 500 Mpts/ch||Max 250 Mpts/ch|
|Display||8.4" LCD(Capacitive touch screen)||12.1" LCD|
|Serial Bus Trigger & Analysis (Option)||4 bus simultaneous analysis – UART, I²C, SPI, CAN, CAN FD, LIN, FlexRay, SENT, CXPI||4 bus simultaneous analysis – UART, I²C, SPI, CAN, CAN FD, LIN, FlexRay, SENT, PSI5|
|Power Supply Analysis (Option)||Switching Loss, SOA, Harmonics, Joule Integral (I2T)||Switching Loss, SOA, Harmonics, Joule Integral (I2T)|
Unfortunately, we do not have an instruction manual describing the*.WDF file format structure like we did for the *.WVF files. However, we do provide a list of support options which will contain more details ...
Yes, the NAK CAN Bus Trigger is supported on the DLM2000 and DL9000. DL9000: Refer to the IM 701310-51E (page 3-13)DLM2000: Refer to the IM 710105-02E (page 2-16)
In the oscilloscope's QIS (Quality Inspection Standards), the "beat method" can be used to inspect and verify the time base accuracy. The "beat method" utilizes the aliasing effect to create a "beat waveform." The "beat ...
The Header Size entry, for a ASCII format data file, denotes the number of header lines in the header part of the ASCII File.
This comprehensive training module covers the following topics:
The Yokogawa DLM3000 oscilloscope features a brand-new computing platform and available power supply analysis functions.
The DLM3000 Automotive Serial Bus features can display up to four simultaneous serial buses and decoded data.
As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies. Topics covered will include switching loss, in-rush current, safe operating area, dynamic ON resistance, harmonics, power factor, and more. Test equipment requirements will be covered as well.
If you are working in mechatronics, this 1-hour seminar will give you a broad overview of all possible measurements, plus tips and techniques for capturing, visualizing, and analyzing your signals and sensors.
Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
Looking for more information on our people, technology and solutions?