What is the Correct Syntax for Implementing the Atan Function on the DL850 Scopecorder?
The correct syntax for implementing the Atan function on the DL850 Scopecorder is ATAN(C1).There is a typo in the DL850 IMDL85001EN 4thEd Features Guide, ATAN(C1,C2) is in-correct. However, the syntax for the DL750 IS ATAN(C1,C2).
The Atan function on the DL850 calculates the arc tangent of the waveforms from Source 1 and Source 2, and outputs an angle in radians within ±π. This differs from typical Atan functions, which calulates the inverse tangent of a number. The formula for Atan calculation on the DL850 is:
Angle = Atan(s1/s2)
where s1 and s2 is the equivalent sampled data from Source 1 and Source 2.
Angle = Atan(s1/s2)
where s1 and s2 is the equivalent sampled data from Source 1 and Source 2.
Yokogawa Scopecorder DL850 Manual
See the DL850E/DL850EV ScopeCorder features guide, user's manual, and more on the main product page.
Related Products & Solutions
Data Acquisition (DAQ)
Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.
High Speed Data Acquisition
- Yokogawa high-speed data acquisition systems
- Industry-leading isolation, bit resolution, sampling rate, and memory depth
- Independent channel hardware and easy to use software
Oscilloscopes
- Digital oscilloscopes
- High-speed sampling
- Range of bandwidths for electronic device design and development
- Advantages of oscilloscope and multi-channel data recorder
ScopeCorders
- Flexible, high-performance Yokogawa ScopeCorder
- Modular platform combines mixed signal oscilloscope and portable data acquisition recorder
- Captures high-speed transients and low-speed trends
Top
