技术与服务热线:400 820 0372

IEC harmonic and voltage fluctuation/flicker test

下载 (609 KB)

WT5000 - Precision Power Analyzer

Overview

Low frequency emission standards required for electrical appliances include IEC 61000-3-2 for harmonics and IEC 61000-3-3 for voltage fluctuation/flicker. The standard adjusted to the power supply voltage in Japan is JIS C 61000-3-2.

Harmonics refer to the distortion components of the current consumption waveform of equipment. When devices such as inverter-driven motors or switching mode power supplies are connected to a commercial power supply, frequency components that are integral multiples of the power supply frequency are generated from the devices, causing distortion in the commercial power supply. Harmonics not only increase the reactive power of a power system, but also cause adverse effects such as equipment malfunction, noise, and burnout.

Voltage fluctuation/flicker refer to variations in power supply voltage and flickering of lighting fixtures (flicker). Power supply voltage fluctuates due to load fluctuations caused by turning on and off electrical appliances. This can cause equipment malfunction and flicker.

CE Marking certification or product development and evaluation require testing to ensure compliance with the latest standards.

Challenges / Demands

Harmonic and voltage fluctuation/flicker tests require  measuring instruments meeting the requirements of each standard. The standards are frequently revised and updated, so you must always check for the latest version.

Because of the complexity of classifying the conditions for  target equipment in standard testing, it is hoped engineers will be able to complete jobs from condition setting to testing, and reporting without any specialized knowledge.

Harmonic test

Evaluate whether the harmonic currents of the power supply voltage are within the limits. IEC 61000-3-12 is a standard for large currents greater than 16 A.

Harmonic test

Voltage fluctuation / flicker test

Evaluate whether power supply voltage fluctuations and flicker are within the limits. IEC 61000-3-11 is a standard for large currents greater than 16 A.

Voltage fluctuation / flicker test

Solution / Proposal

The Precision Power Analyzer WT5000 (/G7 option) and the Integrated Software Platform IS8000’s Harmonic Current and Voltage Fluctuation/Flicker Measurement Software IS8011 / IS8012 can be combined to perform harmonic and voltage fluctuation/flicker tests in accordance with IEC standards.

Solution / Proposal

-  Supported standards:

      • Harmonics
        EN61000-3-2, IEC61000-3-2, EN61000-3-12, IEC61000-3-12, and JIS C 61000-3-2

      • Voltage fluctuation/flicker

        EN61000-3-3, IEC61000-3-3, EN61000-3-11, IEC61000-3-11

-  30 A/ 5 A High Accuracy Element (760901/760902) are available.

-  GP-IB, Ethernet, and USB communications are available.

IS8011 / IS8012 Features

Easy setting with the use of test menus
Standard equipped with power supply control function
Pass/Fail judgment based on the criteria for classes A, B, C and D
Re-judgment after class change
Measured value judgment graph that shows the limits and pass/fail judgments for each harmonic order in different colors
Trend display of harmonic current/flicker in time-series
Reporting capabilities
CSV conversion function

Example of IEC 61000-3-2 test report

Example of IEC 61000-3-2 test report

Supported standards (as of April 2021)

Harmonic standards

IEC 61000-3-2: Ed3.0 (2005), Ed3.0 A2 (2009)

IEC 61000-3-2: Ed4.0 (2014), Ed5.0 (2018)

EN 61000-3-2: 2006, 2009, 2014, 2019

IEC 61000-3-12: Ed1.0 (2004), Ed2.0 (2011)

EN 61000-3-12: 2005, 2011

IEC 61000-4-7: Ed1.0 (1991), Ed2.0 (2002), Ed2.0 A1 (2008)

EN 61000-4-7: 1993, 2002, 2009

JIS C 61000-3-2: 2011, 2019

JIS C 61000-4-7: 2007

Voltage fluctuation / flicker standards

IEC 61000-3-3: Ed2.0 (2008), Ed3.0 (2013)

IEC 61000-3-3: Ed3.0 A1 (2017)

EN 61000-3-3: 2008, 2013, 2019

IEC 61000-3-11: Ed 1.0 (2000), Ed2.0 (2017)

EN 61000-3-11: 2000, 2019

IEC 61000-4-15: Ed1.1 (2003), Ed2.0 (2010)

EN 61000-4-15: 2003, 2011

相关行业

相关产品和解决方案

集成软件平台 IS8000

IS8000软件平台是一套能加速工程流程的集成解决方案。它是一款高度集成了多台仪器时序、控制和数据采集的突破性软件,创建了一套可靠、高效和统一的全方位测量组件。

高精度功率分析仪 WT5000

高精度功率分析仪WT5000为工程师们提供通用的平台,不仅能提供当前所需的可靠测量,还能备战未来挑战。

数字功率分析仪

功率计或称瓦特计,可以测量产生、转换或消耗电能的设备各项特征,包括设备的各项参数,如:功率(瓦特)、功率因数、谐波和效率等等。

YOKOGAWA数字功率分析仪,性能优越、测量可靠,支持各种应用,非常值得拥有。尤其是YOKOGAWA WT300E功率计,在全球功率计市场上口碑与地位日益跃升。

Precision Making

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务