Applicable model*: AQ6370 series/AQ6360
Characterization of optical filters can be done using an optical spectrum analyzer (OSA) and a broadband light source.
The reflection characteristic of the optical filter is obtained as the difference between the reflected light spectrum of the standard reflector** and that of the DUT (reflective optical filter) in case of LOG scale. The measurement light source is selected from wide band light sources such as LED, halogen lamp, ASE, SLD, SC, etc. according to the required optical power and wavelength range.
The applicable models have a free space structure inside the optical input port, and can use large-diameter optical fibers with a core diameter of up to 800 µm. The large fiber delivers more light to the OSA, helping to reduce noise on the measurement waveform and reduce measurement time. However, since the actual minimum wavelength resolution gets lower, it is effective for measurements where the optical power is low and high resolution is not required.
At the time of measurement, be careful not to let stray light (unnecessary irregular reflection light) or ambient light enter the optical coupler. The smaller the numerical aperture (NA) of the optical fiber and the shorter the optical path length from the collimator to the optical coupler, the smaller the loss, which is advantageous for measurement, but high precision adjustment of angle and optical axis is required. Especially the adjustment of the optical coupler side becomes difficult. Therefore, when the optical power is high, it is easier to adjust it by receiving light directly with the ferrule of the optical fiber.
YOKOGAWA offers a variety of OSA in the wavelength range 350-5500 nm that enables measurement of visible (VIS), near-infrared (NIR), short-wave infrared (SWIR), and medium-wave infrared (MWIR) ND filters and bandpass filters.
* All versions unless otherwise specified.
** If the wavelength dependence of the collimator and optical coupler is sufficiently small and the polarization characteristics and absolute power can be ignored, the standard reflector measurement can be omitted and the output of the broadband light source can be used as the reference spectrum.
High Performance LONG WAVELENGTH
The AQ6375E covers not only telecommunication wavelengths, but also the SWIR region which is often used for environmental sensing and medical applications.
・Lineup of 3 models [Standard, Extended and Limited]
・Covers wavelengths
1200 to 2400 nm [Standard, and Limited]
1000 to 2500 nm [Extended ]
MWIR WAVELENGTH with internal gas purge and cut filter
The AQ6376E is the latest version of our bench-top optical spectrum analyzer extending the wavelength coverage well beyond the NIR range of our previous models into the MWIR region from 1500 to 3400 nm.
Popular applications include the detection of gases such as carbon oxides (COx), nitrogen oxides (NOx), and hydrocarbon gas (CxHy) for environmental studies.
AQ6370C支持600nm至1700nm最具代表性的电信波长范围,使其成为适用于单模和多模光纤电信应用的理想机型。
2010年的新增功能涵盖了该仪器的高性能版和标准性能版。
AQ6373提供的350nm到1200nm专用短波长量程可以精确测量380nm到780nm的可见光谱,因此适用于生物科学和其它领域。此型号产品还是测量1064nm Nd:YAG, DPSS激光源的常用工具。
AQ6373B提供的350nm到1200nm专用短波长量程可以精确测量380nm到780nm的可见光谱,因此适用于生物科学和其它领域。此型号产品还是测量1064nm Nd:YAG, DPSS激光源的常用工具。
AQ6375B是一款波长可覆盖2μm以上范围的长波长台式光谱分析仪。 它专为一直苦于无长波长测量仪器可用的工程师和研究人员而设计, 在实现了高精度、 高分辨率和高灵敏度测量的同时, 可以提供全面的分析功能, 从而可省去校准步骤和开发外部分析软件的麻烦。
AQ6376是波长可覆盖2μm以上范围的长波长台式光谱分析仪, 专为一直苦于无长波长测量仪器可用的工程师和研究人员而设计。 AQ6376在实现了高精度、 高分辨率和高灵敏度测量的同时, 还可以提供全面的分析功能, 从而可省去校准步骤和开发外部分析软件的麻烦。