技术与服务热线:400 820 0372

Why is the Display Update Rate Slower Than the Data Update Rate Setting on the WT500 Power Analyzer?

The actual display update rate for the WT500 Power Analyzer will depend on the input signal and the trigger setting. In addition, there may be a very small trigger delay (several milliseconds) if the input signal does not match the trigger condition. For example, when the update rate is set to 1 sec and the trigger mode is set to Auto, if the input signal does not match the trigger condition then the waveform measurement is performed after the sum of 1 sec and the timeout period. The timeout period is 100ms.
 
The display update interval, specified by the WT500 Power Analyzer instruction manual, is listed as:
 
Numeric Display
  • When the data update interval is 100 ms and the numeric display is set to 4, 8, or 16 items, the display update interval is 200 ms.
  • When the data update interval is 200 ms and the numeric display is set to Matrix, ALL Items, Single List, or Dual List, the display update interval is 500 ms.
  • When the data interval is 200 ms and the numeric display is set to Matrix, ALL Items, Single List, or Dual List, the display update interval is 400 ms.
Waveform Display
  • When the data update interval is within the range of 100 ms to 1 s, the waveform display and data update intervals are approximately 1 s.
  • When the data update interval is 1 s or longer, the waveform display and data update rate intervals are the same as the data update interval but may be longer depending on the trigger settings.
Other Display
  • When the data update interval is within the range of 100 ms to 500 ms, the data and display update interval of the trend, bar graph, and vector display is 1 s. When the data update interval is set to 1 s or longer, the various display and data update intervals are the same as the data update interval.
Response Time
  • The maximum response time is the data update interval x 2

 

相关产品和解决方案

功率分析仪 WT500

中等量程的WT500小巧且便于使用。使用其彩色TFT显示器可以观测数值和波形测量。提供1到3个输入单元,基本功率精度为0.1%,带宽为100kHz。

数字功率分析仪

功率计或称瓦特计,可以测量产生、转换或消耗电能的设备各项特征,包括设备的各项参数,如:功率(瓦特)、功率因数、谐波和效率等等。

YOKOGAWA数字功率分析仪,性能优越、测量可靠,支持各种应用,非常值得拥有。尤其是YOKOGAWA WT300E功率计,在全球功率计市场上口碑与地位日益跃升。

Precision Making

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务