技术与服务热线:400 820 0372

中国CN  

2009 活动

3月

Oscilloscope Basics & Key Features of Today's Scopes

Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.

市场活动
2009年3月19日

4月

Fiber to the Home OTDR Testing

Fiber to the Home OTDR Testing
Yokogawa will discuss challenges of fiber installation and maintenance with regards to FTTH networks. Our years of international experience in deploying, testing and maintaining these networks has provided key insights to the challenges and solutions you will face. Join us as we cover OTDR testing in a FTTH environment.

市场活动
2009年4月2日
混合信号示波器和逻辑分析讲座

如果您是一名使用微控制器、DSP或FPGA的嵌入式系统设计师或测试工程师,您肯定不会希望错过这个讲座。要在您的电路中使用嵌入式IC进行设计,您需要前所未有的大型测试工具库,对芯片上的A/D和D/A器件、串行和并行数字总线以及其它各种数字控制信号进行测量和故障排除。作为一名设计或测试工程师,您希望拥有功能尽可能全面的工具。

市场活动
2009年4月14日
Electric Motor Testing Seminar

The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.

市场活动
2009年4月16日

5月

8位示波器不能满足要求时:使用针对机电仪器的高分辨率、隔离和混合信号仪器。

我们都深知使用正确工具的重大意义。虽然传统8位示波器在很多情况下是我们的正确选择,但在进行混合信号、功率和/或机电测量时,它们通常并非最佳选择。市场上的一些仪器在设计时考虑了这些应用。混合仪器提供了传统8位示波器所不具备的功能。这些功能包括:高分辨率(高达16位)和隔离输入、用于长期记录的超长存储、支持各种信号输入(RMS耦合、温度、应变、频率-电压、加速计等 )。

市场活动
2009年5月7日
Introduction and Use of an Optical Spectrum Analyzer

Sign up now for our free training on the many uses of an Optical Spectrum Analyzers. This one hour presentation covers the basics of light, the design, measurement, and test applications of an OSA. Initial subject matter will cover the nature of light and some key aspects of light propagation. In addition this seminar will also cover the design of a Monochrometer, an assortment of test conditions and configurations for measurement of various Device Under Test (DUT). Unique benefits of the Yokogawa line of Optical Spectrum Analyzers will be highlighted at the end of the presentation as well as a head to head performance comparison.

市场活动
2009年5月12日
Intro & Use of an Optical Spectrum Analyzer

This one hour presentation covers the basics of light, the design, measurement, and test applications of an OSA. Initial subject matter will cover the nature of light and some key aspects of light propagation.

市场活动
2009年5月12日
Power Analysis: Precision AC Power Measurements

Who Should Attend

  • Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
  • Test Engineers Responsible for Testing Power Devices.
  • Electric Transportation Systems Engineers.
  • Power Quality Engineers Involved with Product Conformance Testing.
市场活动
2009年5月14日

6月

Digital Oscilloscope Power Analysis Seminar

As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies.

市场活动
2009年6月11日
Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System

Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System

市场活动
2009年6月16日

7月

Technical Oscilloscope Probe Seminar

Today’s engineers are pressured to test high-speed signals in a reliable and timely fashion in a fast-moving environment of design verification and manufacture test. Probing is the front line of that testing; and, having the right knowledge in probing is indispensable for accurate and reliable test results. This seminar will provide you with that necessary knowledge and insight.

市场活动
2009年7月7日
Electric Motor Testing Webinar

The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.

市场活动
2009年7月16日

8月

Power Analysis: Precision AC Power Measurements August 2009

This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.

Who Should Attend

  • Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
  • Test Engineers Responsible for Testing Power Devices.
  • Electric Transportation Systems Engineers.
  • Power Quality Engineers Involved with Product Conformance Testing.
市场活动
2009年8月20日
When 8-bit Scopes Aren't Enough: High-Resolution Isolated, Mixed-Signal Instruments for Electro-Mechanical Measurements Webinar August 25, 2009

We all know what a difference the right tool can make. While traditional 8-bit oscilloscopes are the right choice in many situations, they often are not the best choice when making mixed signal, power and/or electro-mechanical measurements.

What you will learn in this seminar:

  • Understand differences between oscilloscopes, recorders and hybrid instruments.
  • Identify key instrument specifications for electro-mechanical applications.
  • Why hybrid instruments are often the best choice.
  • Discuss specialized functions designed for electro-mechanical applications.
市场活动
2009年8月25日

9月

Technical Oscilloscope Probe Seminar September 10, 2009

Who Should Attend:

Engineers and technicians who:

  • are new to testing signals with oscilloscopes
  • make measurements at 50 MHz or higher
  • design or test power supplies
  • desire to improve test result repeatability
  • wish to more fully utilize existing scopes by choosing the best probe for a given application.
市场活动
2009年9月10日
Oscilloscope Basics & Key Features of Today's Scopes September 22, 2009

Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.

市场活动
2009年9月22日
Power Measurement & Harmonic Analysis: Applications using the latest Digital Power Analyzers

Power Measurement & Harmonic Analysis Seminar is the second part from the Yokogawa T&M University series on precision AC power measurements. This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms like from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.

市场活动
2009年9月24日
混合信号示波器的发展

作为数字示波器领域的全球领导者和开拓者,Yokogawa邀请您参加此技术讲座,共享混合信号示波器技术的最新发展动态。本讲座将讨论异常/突波检测、波形特性、信号增强、串行总线分析、特殊混合信号注意事项等项目的理论及应用。

市场活动
2009年9月29日

10月

Electric Motor Testing Seminar October 8, 2009

The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.

市场活动
2009年10月8日
Digital Oscilloscope Power Analysis Seminar October 13, 2009

As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies.

市场活动
2009年10月13日

11月

Technical Oscilloscope Probe Seminar November 5, 2009

Who Should Attend:
Engineers and technicians who:

  • are new to testing signals with oscilloscopes
  • make measurements at 50 MHz or higher
  • design or test power supplies
  • desire to improve test result repeatability
  • wish to more fully utilize existing scopes by choosing the best probe for a given application.
市场活动
2009年11月5日
UART、I2C/SPI/SM、CAN/LIN/Flexray:MSO网络课程为您提供串行总线协议分析及物理层故障排除的提示和技巧

串行数据总线变得日益通用,已经成为大多数电子设计的核心部件。作为设计或测试工程师,您当前需要使用逻辑分析仪、协议分析仪、数字示波器,或者结合使用所有三种设备以用于调试串行总线信号。但截止目前,单独使用这三种仪器中的任何一种,您都无法全面了解物理层和协议层。

市场活动
2009年11月17日
Power Transient Analysis Using a ScopeCorder

What you will learn in this seminar?

You will learn ways that the ScopeCorder offers a solution to typical power & transient analysis measurement requirements.

  • High-resolution measurements up to 16-bit
  • 16 fully isolated input channels
  • Long recording memory & transient analyses functions
  • How does a ScopeCorder supports a variety of input signals like, RMS-coupling, temperature, strain, frequency, voltage, speed, torque, accelerometer input.

市场活动
2009年11月19日

12月

40G Client and Line Side Testing Basics 12/15/09

The increased use of 40G client and network interfaces has driven new Protocol and Performance verification. This session will review 40G Client interface testing using SONET/SDH/OTN protocols over NRZ optical interfaces, as well as network testing of OTN and Ethernet over OTN using DPSK and DQPSK optical interfaces.

市场活动
2009年12月15日

Events Archive

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务