Will all DL750 Modules Work on the DL850 or SL1000?

In most cases, all the DL750 modules will be compatible with the DL850 and SL1000.

However, there are some module which can be used with DL750 but cannot be used with DL850. These are typically the early DL750 modules that were released with the DL850. The boot up procedure of the DL850 will confirm the serial number and FPGA number of the module. There are a few DL750 modules that were designed to not be FPGA interchangeable. If you have any questions on whether your module is compatible with the DL850 or SL1000, please contact your nearest Yokogawa representative with your module's serial number.

 

Related Products & Solutions

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.

Oscilloscopes

World-class digital oscilloscopes from Yokogawa: The digital oscilloscopes have high-speed sampling and a wide range of bandwidths that can be utilized for design and development of electronic devices. The ScopeCorders have the advantages of both a digital oscilloscope and a multi-channel data recorder.

ScopeCorders

A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low-speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, onboard calculations, and deep data acquisition storage into an off-the-shelf data acquisition solution.

Top