What is the Difference Between the DL/DLM Series IEC Harmonic Measurement and the WT3000 Precision Power Analyzer IEC Harmonic Measurement via the Harmonic Analysis Software?

The IEC Harmonic analysis on the DL/DLM series oscilloscopes provides a rough analysis and estimation for harmonic testing. The scope will perform an FFT on the current waveform and can be used to measure the general characteristics of harmonics.

If you are required to make IEC harmonic measurements as defined by the IEC61000-4-7 standard, it is highly recommended you use the WT3000 Precision Power Analyzer with the Harmonic Analysis Software. The IEC61000-4-7 contains strict requirements on the types of instruments and test methods that can be used.

One example is the FFT window width for harmonic test must be 10 cycles (e.g.), the data should be acquired by the period of every 200 ms continuously, and no gap is permitted. The WT3000 with Harmonic Analysis Software 761922 will satisfy this requirement completely, but the DL/DLM series oscilloscopes with current probe cannot.

It is also important to use a power supply with very low noise and high accuracy. You cannot use a general commercial power supply or a low quality power supply for the harmonics test, because those power supplies may include the harmonics in their own waveforms.

Related Products & Solutions

DL7440/DL7480 Digital Oscilloscopes

8-channel 500 MHz oscilloscope with 16 logic inputs, for applications where four channels aren't enough. Support for eight analog channels, 16 bits with 250MHz logic bandwidth, 16MP of recording memory, power analysis, serial bus analysis, and a broad selection of voltage and current probes.

DL9000 DSO Series

500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

DLM6000 MSO & DSO Series

500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.

Precision Power Analyzer WT3000

With 0.02% accuracy and 1MHz bandwidth, the WT3000 delivers where the highest precision measurements are required. It is the industry standard for R&D work on inverters, motor drives, lighting systems and electronic ballasts, UPS systems, aircraft power, transformer testing, and other power conversion devices.

Mixed Signal Oscilloscopes

Yokogawa mixed signal oscilloscopes
Simultaneous, time correlated observations
Analysis of analog with digital (logic) signals
Troubleshooting electrical anomalies, measuring parametric values, monitoring signals

Oscilloscopes

Digital oscilloscopes
High-speed sampling
Range of bandwidths for electronic device design and development
Advantages of oscilloscope and multi-channel data recorder

Power Analyzers and Power Meters

Yokogawa, the world's largest manufacturer of energy and power analyzers and meters, provides a broad choice of digital power analyzers to satisfy all requirements.

Power Measurement Application Software

Yokogawa's Power Analyzer software manages numeric, waveform, and harmonic data measurements. It enables data logging and instrument configuration from your computer.