Is the Data Assignment the Same When the Logic Input Values are Saved in ASCII Format on the DL708/DL708E Digital Scope and the DL2700 Digital Oscilloscope?

Digital Scope DL708/DL708E: The ON/OFF conditions of bit signals from A1 to A8 and B1 to B8 are expressed as a 16-bit value. The 16-bit value is then converted to a decimal value and the result is saved. The value is written as a number between 0 and 65535. When all bits are ON, the decimal number 65535 is saved. 

DL2700 Digital Oscilloscope: The ON/OFF conditions of bit signals from A0 to A7 are expressed as an 8-bit value. The 8-bit value is then converted to a decimal value and the result is saved. This applies to B, C, and D. When all bits are ON, the decimal number 255 is saved. 
                      

Note: The upper bits and lower bits are reversed between DL708/DL708E and DL2700.