DL850 ScopeCorder - How to maximize repeatability of Phase Measurements
DL850 ScopeCorder - How to maximize repeatability of Phase Measurements
- Use a direct-input if possible; this will remove the delay due to passive-probes 700929 being different between a pair of input channels (in phase response);
- Be sure INPUT COUPLING is set properly; it is easy to overlook; so, if you do use an input probe, be sure to set to 10:1, as an example.
- Set your V/DIV or SPAN up so as to maximize VERTICAL RESOLUTION - us as near to 20 vertical divisions as possible; this will decrease the influence of noise on the zero-crossing measurement of each waveform.
- Optional: using a BW-limiting filter at the front-end would further improve stability; it may actually (in theory) introduce some detectable phase-shift, so be sure to use the same filter on both channels if filtering is desirable.
Related Products & Solutions
Data Acquisition (DAQ)
Scalable DAQ systems with industry-leading isolation, noise immunity, built-in conditioning, and real-time analysis, ensuring accurate, reliable measurements and faster decisions.
High Speed Data Acquisition
- PC-based, streaming, local, or remote operation
- 20+ modules, isolated and versatile inputs
- Up to 200 MS/s or 640 ch
- Used in aerospace, automotive, energy, and manufacturing industries
Isolated Oscilloscopes | ScopeCorders
- An integrated measurement system for every electromechanical application
- Modular platform combines oscilloscope and DAQ functionality
- Capture high-speed transients and low-speed trends
Oscilloscopes
Accelerate debugging and gain deeper insight with high-resolution oscilloscopes designed for speed, clarity, and precision.
Top