How do I Recover From a DL850 ScopeCorder Firmware Upgrade Failure?
If during the DL850/DL850 ScopeCorder firmware upgrade process, the display screen turns black, blue, or something in between and the installation failed, please complete the following steps. You will need a USB printer cable to complete the recovery process.
- Download the file
http://support.us.yokogawa.com/downloads/TMI/HFI/DL850/DL850_Recovery_to_110_via_USB_Cable.zip - Contact Yokogawa Technical Support with the unit's serial number and for zipped file password
- Unzip all files to a folder destination
- Connect the DL850 to PC with a USB printer cable
- Install the USB driver onto your PC
- Power DL850 OFF
- While holding the F2 soft key, power DL850 ON
- Wait for at least 15 seconds
- Double click the Update850.BAT file
- Follow on-screen prompts
- When binary upload to DL850 is complete, cycle the power
- Power DL850 ON
- Allow firmware installation to complete
Related Products & Solutions
Data Acquisition (DAQ)
Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.
High Speed Data Acquisition
- Yokogawa high-speed data acquisition systems
- Industry-leading isolation, bit resolution, sampling rate, and memory depth
- Independent channel hardware and easy to use software
Top