技术与服务热线:400 820 0372

How do I Measure the Offset of the 701912, 701913, or 701914 Active Probe?

You can use the DL9000 Digital Oscilloscope to measure the offset of the 701912, 701913, or 701914 Active Probe. The specification for the Active Probes is ± 2mV. To measure the offset, follow the procedures listed below.

  1. Connect the Probe to the DL9000
  2. Allow the scope to warm up for 30 minutes for the most accurate measurement
  3. Press one of the CH1 to CH4 keys to select the channel
  4. Press the Coupling soft button and select DC50
  5. Press the Probe soft button and select 1:1
  6.  Press the Next 1/2 soft key
  7. Press the Offset Cancel soft key to select ON
  8. Press the Bandwidth soft button and select 1 MHz
  9. Press ACQ  Hi-Res Mode soft button to select ON
  10. Short the input terminals of the probe using a wire, paper clip, or similar method
  11. Press the TRIG MODE/HOLD OFF key and select Auto
  12. Turn the T/Div rotary knob and set to 10us/div
  13. Measure the offset with Horizontal Cursors

Please download and view the attached image file to view a screenshot example of the 701912 probe offset measurement.

相关产品和解决方案

波形测量仪器

Yokogawa在业界首推示波记录仪的概念,将数字示波器和多通道数据记录仪的优点集于一身。横河示波记录仪作为世界一流的示波记录仪具有高速采样能力和大测量带宽的优点,可广泛应用于电子工程的设计和开发过程。

横河示波器既有面向低成本市场的4CH MSO示波器DLM3000系列,也有业界唯一的8CH MSO示波器DLM4000系列,在由智能控制的消费电子和工业驱动等电路设计的众多领域中,成为全球工程师的首选工具。

Precision Making

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务