How Long Does it Take to Transfer Measured Data from the DL2700 Digital Oscilloscope to the PC via GPIB?

The data transfer rates for binary data is as follows:

                      

1 kW	0.035s
10 kW	0.180s
50 kW	0.779s
100 kW	1.536s
250 kW	3.812s
500 kW	7.527s
1 MW	15.067s
2 MW	30.000s

The data transfer rates for ASCII data is as follows:

                      

1 kW	3.067s
10 kW	30.50s
50 kW	152s
100 kW	335s
250 kW	838s
500 kW	1680s
1 MW	3356s

 

Please consider these values as a reference. These times were measured from the point at which the data transmission request command is sent by the PC to the point at which the data reception is completed.