VZ20X Analog Sensing Unit
The VZ20X Analog Sensing Unit is the world’s smallest class of sensing remote I/O unit. Capable of measuring multiple analog signals simultaneously at high voltages, at high speed, and with high accuracy, the VZ20X enables data from a variety of isolated inputs to be measured at once and eliminates the need for numerous data measurement devices.
Key Features
- Measurements: < 15 units, < 120 channels, and < 8 analog inputs
- High-speed sampling: < 1ms
- Synchronization accuracy: ±100 µs
- Measurement accuracy: ±0.05%
- Temperature accuracy: ±0.16°C
- Voltage accuracy: ±1mV
Reliable Data Acquisition
The VZ20X Analog Sensing Unit is a low-speed data acquisition device that enables simultaneous multi-channel measurements from multiple instruments that are precise, accurate, and reliable.
High Accuracy Sensing at High-Speed
A single VZ20X device can measure eight channels of analog inputs at high speed with a sampling cycle of 1ms and supports simultaneous measurement up to 15 units and 120 channels. Just as impressive is its capability to perform extremely precise measurements that boast synchronization accuracy of ±100 µs, measurement accuracy of ±0.05%, temperature measurement accuracy within ±0.16°C, and voltage measurements accuracy to ±1mV.
Multi-Instrument Connectivity
Able to communicate via Modbus/TCP protocols through the IS8000 Integrated Test and Measurement Software Platform and the GA10 Data Logging Software, the VZ20X enables data synchronization across multiple devices and different instruments. Acting as a compact signal conditioner, it easily integrates with other instruments to log data to an external PC, resulting in more accurate data with less hassle for more efficient data analysis.
Supports Any Analog Sensor
The VZ20X supports all different types of analog sensors, including but not limited to universal signals, DC voltage, thermocouple (TC), 3-wire/4-wire RTD, 4-wire resistor, and more.
Isolated Inputs for High Noise Resistance
Isolation between input channels makes the VZ20X highly noise resistant for more stable data measurements in all manner of noisy environments, even when simultaneously measuring multiple channels.
No Power Outlet Needed
With the USB Type Detection Disable feature on the VZ20X, users can power the device by sources other than USB Type-C. Because the device can be powered from a PC’s USB Type-A port, there is no need for an external 24V DC power supply or power cable, which reduces costs and increases efficiency. The VZ20X can also connect to a power-over-Ethernet (POE) splitter, enabling power via Ethernet cable.
Compact Design
Shorter and narrower than a business card and weighing less than 200g, the VZ20X is one of the world’s smallest analog sensing units. Its lightweight and compact portable design allows for easy installation with a variety of equipment types and in most environments via a simple push-in connection mechanism and ferrule terminal.
Main Body: Analog Sensing Unit: VZ20X-1N1NDD
| Item | Specification |
|---|---|
| Number of inputs | 8 channels |
| Input types | DC voltage, unified signal, 4-wire resistor, thermocouple, and 3-wire/4-wire RTD |
| Data acquisition interval | 1 ms (fastest), 8 channels simultaneous measurement |
| Meas. synch. accuracy | Within ±100 μs (between input channels, between units) |
| Measurement accuracy | 0.025% of FS (with DC voltage, and power supply frequency noise removal filter enabled) |
| Withstanding voltage | 3,000 VAC (50 Hz/60 Hz) 1 min. (between analog input channels, analog input-to-internal circuit) |
| Power supply | 24 VDC or USB |
| Operating temperature/humidity | -10–55°C (DIN rail-mounted), -10–50°C (on desktop installation) /5–90% RH |
| Wiring | Push-in terminal, Ferrule terminal |
| Size | Height (H) 78 x width (W) 50 x depth (D) 65 mm |
| Ethernet communication | 2 ports, protocol: Modbus/TCP, GA10 dedicated protocol |
| Installation | DIN rail-mounted, On desktop installation |
| Standards |  |
VZ Configurator
| Item | Description |
|---|---|
| Parameter settings | Input range/scale, Ethernet communication conditions |
| Monitor function | Real time monitoring Self-diagnosis |
| Maintenance | Firmware update Input adjustment |
IS8000 Integrated Software Platform
- IS8000 comprehensive test and measurement software
- Accelerate engineering workflow
- Integrate timing, control, and data collection from multiple instruments
GM10 Modular Data Acquisition & Logging System
- Modular housing for <10 I/O modules
- Multi-unit configuration measurement capability <420 input channels
- Internal memory <1.2GB
- Installation flexibility (no attachments required)
- Multiple measurement channel alarms
How-tos
In this video, an Application Engineer shows users how to bring in Modbus/TCP-communicating instruments for measurement data synchronization across devices with the IS8000 Integrated Test and Measurement Software Platform from Yokogawa Test&Measurement.