Why can't I connect my GM10 to IS8000?
The GM10 can connect to IS8000 through Modbus. This requires the /MB1 option on IS8000 and software version 23.2.1.0 or later.
After confirming that the network settings are correct, select the WIRE as ModbusTCP, select a GM10 Read file, and type the IP address of the GM10.
Also, check and make sure the Modbus function is turned on in the GM10 in the server list in the Communication (Ethernet) settings.
Related Products & Solutions
GM10 Modular Data Acquisition & Logging System
- Modular housing for <10 I/O modules
- Multi-unit configuration measurement capability <420 input channels
- Internal memory <1.2GB
- Installation flexibility (no attachments required)
- Multiple measurement channel alarms
IS8000 Integrated Software Platform
- IS8000 comprehensive test and measurement software
- Accelerate engineering workflow
- Integrate timing, control, and data collection from multiple instruments
Data Acquisition (DAQ)
Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.
Power Measurement Application Software
Yokogawa's Power Analyzer software manages numeric, waveform, and harmonic data measurements. It enables data logging and instrument configuration from your computer.
Top