Attenuating Saturated-Regulator Operation Effect of Brushless DC Motors Through Genetic-Based Fuzzy Logic Estimator

In the below linked research published by the Turkey Journal of Electrical Engineering and Computer Sciences (TÜBİTAK), researchers from Düzce University and Gazi University use a Yokogawa Test&Measurement DLM4038 Mixed Signal Oscilloscope to collect and view phase current waveforms.

  • Title: Attenuating Saturated-Regulator Operation Effect of Brushless DC Motors Through Genetic-Based Fuzzy Logic Estimator
  • Authors: Emre Çelik, Nihat Öztürk
  • Abstract: As brushless DC motor (BLDCM) speed approaches base speed, current regulators gradually saturate and lose their ability to perform their regulating task, which causes a dramatic fall in the phase currents and motor power. To control the current to a greater extent and avoid power decline, a new reference current generation technique based on a simple fuzzy logic estimator (FLE) is introduced in this paper. According to motor speed and current command, the developed FLE decides the proper commutation angle $\alpha $, which is the angle relative to normal commutation instant used for setting the current slew rate during commutation. In this sense, current references are obtained with the same slew rates of commutated phases all the time, ensuring the noncommutation phase current is constant. The validity of the study is widely verified using DSP of TMS320F28335 and it is concluded that promising performance and simplicity are important advantages of our proposal that render it convenient for a BLDCM drive system that requires boosted power in high-speed ranges.

To access the full research paper, click here: Attenuating Saturated-Regulator Operation Effect of Brushless DC Motors Through Genetic-Based Fuzzy Logic Estimator

Related Industries

Related Products & Solutions

DLM4000 Series Mixed Signal Oscilloscope

8 channel mixed-signal oscilloscopes for every engineer in bandwidths of 350 MHz or 500 MHz. Best-in-class performance in usability, acquisition, analysis, and display.

DLM5000 Series Mixed Signal Oscilloscope

The DLM5000 series offers versatile measurement options with up to 8 analog channels.

  • 4 or 8 analog channels
  • 16-bit logic + optional additional 16-bit logic
  • Bandwidth: 350 or 500 MHz
  • Sample Rate: up to 2.5 GS/s
  • Vertical resolution: 8 bit
  • High resolution mode: up to 12 bit
  • Measurement memory: up to 500 MegaPoints
  • History waveforms: up to 100,000 triggers
  • Synchronization function for up to 16 analog channels
  • Logic and Serial Bus Analysis

The Power of One

When precision test and measurement hardware and software converge to enable engineering groups to work together cohesively, it’s The Power of One.

Precision Making

Top