SEMICON Southeast Asia 2025

• DCV output range: -1224.00 V to +1224.00 V
• DCI output range: -12.2400 A to +36.720 A
• V/I Accuracy: ±50/70 ppm
• V/I Stability: ±10/20 ppm/h

• 1000 Arms maximum 
• DC to 300 kHz bandwidth
• Clamp-on Flux Gate sensor 
• High accuracy (0.2%)
• Interface: BNC (WT series, ScopeCorders, and DLM series)

• Easy-to-use touch panel
• 3 and 9-slot frame controllers
• Hot-swappable reconfiguration
• Synchronized trigger I/O by frame or module
• USB, Ethernet, GPIB (optional)

• 0.03 nm resolution
• ±20 pm accuracy
• 65 dB close-in dynamic range
• -80 dBm level sensitivity
• Highest sweep speed
•  

• 0.02 nm resolution
• ±8 pm accuracy
• 78 dB close-in dynamic range
• -90 dBm level sensitivity
• Single-mode and multi-mode
•  

• 0.02 nm resolution
• ±50 pm accuracy
• 60 dB close-in dynamic range
• -80 dBm level sensitivity
• Single-mode and multi-mode
• Industrial & biomedical laser testing

The CA500 and CA550 are high-performance, multi-function calibrators designed for use in multiple applications. Featuring useful functions for field work, these multi-function calibrators help you calibrate field instruments with improved source and measurement accuracy.

A compact, battery-powered, touch screen instrument you can take into the field featuring the measurement and recording capabilities you need for maintenance and troubleshooting.

Capture and analyze a wide variety of electromechanical signals and serial buses. High sample rate, long recording times, advanced triggers, and real-time analysis.

The DLM3000HD redefines high-definition in a compact design.

•  
• 4 analog channels
• 8-bit logic
• Bandwidth: 350 or 500 MHz
• Sample Rate: up to 2.5 GS/s
• Vertical resolution: 12-bit
• High resolution mode: up to 16-bit
• Measurement memory: up to 1 GigaPoints
• History waveforms: up to 200,000 triggers
• Synchronization function for up to 8 analog channels
• Logic and Serial Bus Analysis
•  

The DLM5000HD series sets a new standard for high-definition oscilloscopes.

• 4 or 8 analog channels
• 16-bit logic + optional additional 16-bit logic
• Bandwidth: 350 or 500 MHz
• Sample Rate: up to 2.5 GS/s
• Vertical resolution: 12 bit
• High resolution mode: up to 16 bit
• Measurement memory: up to 1 GigaPoints
• History waveforms: up to 200,000 triggers
• Synchronization function for up to 16 analog channels
• Logic and Serial Bus Analysis

The MT300 is a silicon-resonant pressure standard with 0.01% accuracy and 12-month stability, adopted in international metrology and trusted for both laboratory and field calibration.

• Handheld calibrators for full spectrum of commonly measured signals in plant operations 
• Trusted reference for verifying industrial instrumentation

• An integrated measurement system for every electromechanical application
• Modular platform combines oscilloscope and DAQ functionality
• Capture high-speed transients and low-speed trends

• ACV output range : 10 mV to 1250 V
• ACI output range : 0.3 mA to 62.5 A
• V/I/P Accuracy : ±350/450/450 ppm
• Frequency : 40 to 1200 Hz

• High-resolution measurement of optical power vs wavelength
• Ideal for R&D, manufacturing, and laser characterization
•  

Market-leading optical test solutions with best-in-class OSAs to validate high-speed fiber networks and next-generation photonics systems.

• High peak wavelength accuracy (±0.2 ppm)
• Wavelength & power of CW laser and DWDM systems
• FT interferometer-based design

Accelerate debugging and gain deeper insight with high-resolution oscilloscopes designed for speed, clarity, and precision.

• Up to 6 wattmeters
• 0.05% of rdg + 0.05% of rng
• DC, 0.1Hz to 1MHz
• 2 motor inputs
• Harmonics to 500th order
•  

• Up to 3 wattmeters
• 0.1% of rdg + 0.05% of rng
• DC, 0.1Hz to 100kHz
• Standby Power, Energy Star®, SPEC Power® and IEC62301/EN50564
•  
•