701927 Differential Probe 1400V / 150 MHz
|
Bandwidth |
: |
DC to 150 MHz |
|
Attenuation |
: |
500:1/50:1 |
|
Max. Input Voltage |
: |
±1400 V (DC + ACpeak) or 1000 Vrms CAT II |
|
Max. Differential Voltage |
: |
±1400 V (DC + ACpeak) at 500:1 attenuation |
|
Probe Power |
: |
dedicated probe interface |
|
1m Extension Lead Set is bundled |
||
1400 Vpeak capability is suitable for un-grounded and floating voltage measurements in power electronics and mechatronics applications including inverters, motor drives, and power supplies. 1 m long extension lead pair is included as a standard accessory. Standard pincher tips are exchangeable a wide variety of 4mm safety adapters (sold separately). The 701927 isolated differential probe has a reduced size and weight over comparable probes (50% reduced volume over the Yokogawa 700924).
Specifications
| Input type | Balanced differential input |
|---|---|
| Frequency band | DC TO 150 MHz (-3 dB) |
| Input attenuation ratio | 50:1 and 500:1, user selectable |
| Input impedance | Approximately 4 MΩ |
| Maximum allowed differential voltage | ± 1400 V(DC+ACpeak) (1/500) |
| Maximum common mode input voltage | ± 1400 V(DC+ACpeak) or 1000 Vrms |
| Common Mode Rejection Ratio (CMRR) | -80 dB (60 Hz), -50 dB (1 MHz) |
| Output voltage | ±2.8 V |
| Output impedance | Used with 1 MΩ input impedance |
| Power Supply | Yokogawa Probe Interface Only |
| External dimensions (approximate) | 174 mm x 58 mm x 27 mm |
| Total length | Approximately 2.4 meters |
| Weight | Approximately 500 grams |
| Approved standards |
Brochures
- PBDH0150 701927 150 MHz Bandwidth / High-Voltage Differential Probe (1.3 MB)
- Probes and accessories for Oscilloscopes (2.2 MB)
