Saved DL850 ScopeCorder Files Won't Refresh in Windows When USB is Set to Storage Mode
Resources:
If the files saved on the DL850 ScopeCorder do not appear on the PC, please disconnect and reconnect the USB connection from the DL850 to the PC.
This behavior is normal for Windows based operating systems including Windows XP, Windows Vista, and Windows 7. When the DL850 is connected to a Windows OS PC, the Windows OS thinks that the removable disk can only be accessed by itself. Any other OS will be ignored by the Windows OS.
As a result, when you first connect the instrument to the PC via USB connection, the Windows OS will catalog and index existing files on the DL850 HDD. Any new files that are stored onto the removable disk will not be detected by the Windows OS. There is no current solution to this detection issue, as it is a Windows phenomenon.
Also, please make note of the following:
This behavior is normal for Windows based operating systems including Windows XP, Windows Vista, and Windows 7. When the DL850 is connected to a Windows OS PC, the Windows OS thinks that the removable disk can only be accessed by itself. Any other OS will be ignored by the Windows OS.
As a result, when you first connect the instrument to the PC via USB connection, the Windows OS will catalog and index existing files on the DL850 HDD. Any new files that are stored onto the removable disk will not be detected by the Windows OS. There is no current solution to this detection issue, as it is a Windows phenomenon.
Also, please make note of the following:
- Never access the DL850/DL850V internal hard disk from the DL850/DL850V menu when USB Function is set to Storage
- When you access the internal hard disk of the DL850/DL850V from a PC, only perform read operation. Doing otherwise may damage the DL850/DL850V
Related Products & Solutions
Data Acquisition (DAQ)
Simplify complex testing with DAQ systems that flex to your needs. Capture and analyze any physical or electrical signal with ease, transforming signals into actionable insights that speed innovation and improve reliability.
High Speed Data Acquisition
- PC-based, streaming, local or remote operation
- 20+ modules, isolated and versatile inputs
- Up to 200 MS/s or 640 ch
Isolated Oscilloscopes | ScopeCorders
- An integrated measurement system for every electromechanical application
- Modular platform combines oscilloscope and DAQ functionality
- Capture high-speed transients and low-speed trends
Oscilloscopes
Accelerate design and troubleshooting with oscilloscopes that combine high-speed sampling, long record lengths, and mixed-signal analysis. From quick debug to advanced R&D, Yokogawa oscilloscopes help you see deeper, work faster, and design smarter.
Top
