- Optical Spectrum Analyzer
- Optical Time Domain Reflectometer
- Optical Wavelength Meter
-
Modular Manufacturing Test System
- AQ2212 Frame Controller (9 Slots)
- AQ2211 Frame Controller (3 Slots)
- AQ2200-112 LS Module (DFB, 1/2 channels)
- AQ2200-131/132 Grid TLS Module (C/L band, 1-channel / 2-channel)
- AQ2200-215 Sensor module (high Power up to +30dBm, 970 to 1660 nm)
- AQ2200-221 Sensor module (Dual channel, long wavelength)
- AQ2200-232 Optical Sensor Head (Large diameter detector, 800 to 1700 nm), AQ2200-242 Optical Sensor Head (Large diameter detector, 400 to 1100 nm), AQ2200-202 Interface Module (2-channels)
- AQ2200-312 Optical Attenuator module
- AQ2200-332 Optical Attenuator module
- AQ2200-342 Dual Attenuator Module (with built-in OPM)
- AQ2200-411 Optical Switch Module (1 x 4/1 x 8)
- AQ2200-412 Optical Switch Module (1 x 16)
- AQ2200-421 Optical Switch Module (1 x 2/2 x 2)
- AQ2200-642 Transceiver I/F Module
- AQ2200-651 SG Module
- Portable Power Meters and Light Sources
- Portable Ethernet Testers
AQ2200-232 Optical Sensor Head (Large diameter detector, 800 to 1700 nm), AQ2200-242 Optical Sensor Head (Large diameter detector, 400 to 1100 nm), AQ2200-202 Interface Module (2-channels)
- Large-diameter detector for free-space measurement
5 mm dia. (AQ2200-232), □5.8 mm (AQ2200-242) - Multi-core connector and cable measurement
The AQ9340, AQ9436C and AQ9440C are required. - Power range: -90 to +15 dBm (AQ2200-232)
-90 to +10 dBm (AQ2200-242) - Uncertainty: ±1.8% (1310 nm, AQ2200-232)
±2.5% (850 nm, AQ2200-242) - Averaging time: 100 µm (minimum sampling intervals)
- Two sensor heads can be connected to the AQ2200-202 Interface module
■I/L curve measurement of LD module
The I-L curve, drive current – optical power characteristics, of laser diodes can be measured accurately, quickly and seamlessly.
Because, the single-range power range of the new sensor head is as wide as 30 dB.
It enables to measure signals close to a threshold value at high resolution without changing the gain of amplifier circuit which takes extra time.
■Experiment of free space optics
In experiments of free-space optics, optical parts are set on an optical bench or a breadboard, and the adjustment of optical alignment is most time consuming work.
The new optical sensor head is compatible with the 60 mm cage system.
It make it easy to build a optical experiment systems by combining with various cage system parts in the marketplace.
 |
Reduced emission of CO2 about 39% compared to the previous model.（AQ2200-232） |
AQ9340 MPO connector adapter
- Applicable connector:
12-fiber or 24-fiber (AQ9340-12)
16-fiber or 32-fiber (AQ9340-16)
- Compatible with both with and without guide pins
AQ9436C Ribbon fiber adapter
- Adapter for a ribbon fiber folder of fusion splicer
- Fiber count: 2, 4, 8 and 12 fibers
Brochures
- AQ2200 Series Multi Application Test System (4.4 MB)
- AQ2200 Series Multi Application Test System Data sheet (2.9 MB)
Specifications
–A new model for measuring light in the short-wavelength region–
–Ideal tool for manufacturing test and inspection of devices used to optical communication systems–