When Performing a "ZONE" Search Using DL750 History, if "No Matching Record" is Found in History, the DL750 Displays a Warning Message. Is There a Programmatic Method to Check/Read This Warning Message?

Unfortunately there is no way to read these warning messages on the DL750. In addition, there is no other command available to determine if there was "No Matching Record" found in History for a particular ZONE condition.
Typically, if you had 20 records in HISTORY, and you performed a ZONE condition search, then to find all the records (in History) that matched the ZONE condition programmatically, you will have to perform a series of command sequences to determine those record numbers.

- "-20" records in History
- After executing ":HISTORY:EXECUTE", record numbers -3, -9, and -15 matched the ZONE condition.
The program script to determine the record numbers that matched the ZONE condition will be as follows:
Reply is “-3”
Reply is “-9”
Reply is “-15”
Reply is “-15”
When the reply to ":HISTORY:RECORD?" is the same as previous query, this means that there are no more records availble in History that matched the ZONE condition.

Related Products & Solutions

Data Acquisition (DAQ)

Data acquisition (DAQ) is the measurement, recording, analyzing, and presentation of real world phenomena. It includes electrical measurements such as voltage, current, power as well as measurements through sensors and transducers including temperature, pressure, strain, vibration, and more.

High Speed Data Acquisition

Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.


Capture, analyze, and troubleshoot electrical or real-world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time.


A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low-speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, onboard calculations, and deep data acquisition storage into an off-the-shelf data acquisition solution.