KNOWLEDGEBASE
(4) Results were found. Showing 1-4.
Why do I Need to use a Hub When Communicating With the Instrument via Ethernet?
The AC Power Input in all Yokogawa instruments is designed as a 3-pin connection (one of which is a GND pin). In some parts of the world, PCs are sold with AC power cables that are 2-pin. Often times this means the PC d...
item: 906 | http://tmi.yokogawa.com/ar/service-support/faqs/906/
Can Multiple GS Units be Connected in Series/Parallel to Boost the Output Voltage/Current?
It is possible to connect multiple GS units in series/parallel connections to boost the maximum voltage/current, provded the values are within the range of maximum voltage/current of those limiters. To amplify the output...
item: 597 | http://tmi.yokogawa.com/ar/service-support/faqs/597/
Can the GS610 or GS820 be Used as a DMM to Only Measure Voltage?
No, the GS610 and the GS820 cannot be used solely as a DMM to measure only voltage. This is because the Sense terminal cannot be separated from the Output terminal on the instrument. The GS Series uses the Output termin...
item: 938 | http://tmi.yokogawa.com/ar/service-support/faqs/938/
Can I Upgrade a GS200 to Add the Monitor Option (/MON)?
Unfortunately, we cannot upgrade a GS200 to add the /MON option. The GS series instruments, which includes the GS610 and GS820, cannot be retrofitted or upgraded with new options after the initial purchase. All options m...
item: 1043 | http://tmi.yokogawa.com/ar/service-support/faqs/1043/
