700988 400 MHz Passiver Tastkopf

A 400 MHz passive probe designed for the DL1700E series, and DL7400 series SignalExplorers with switchable attenuation ratio of 1/10 and 1/1.

Bandwidth: DC to 400MHz (-3dB, 1/10)
Attenuation ratio: 1/1 or 1/10
Maximum input voltage: 600V (DC + ACpeak)
Cable length: 1.5m

Item Specifications Conditions
Probe length 1.5m
Connector type BNC
Input resistance2 10 Mohm ±2% In conjunction with an oscilloscope with an input impedance of 1 Mohm ±1%.
Input capacitance2 Approx. 14 pF In conjunction with an oscilloscope with an input impedance of 1 Mohm ±1%
Input capacitance1 150 pF max. Probe only
Attenuation ratio2v 1/10 ±2% In conjunction with an oscilloscope with an input impedance of 1 Mohm ±1%.
Bandwidth2 DC to 400MHz (-3 dB or less) Subject to change depending on type of oscilloscope used.
Bandwidth1 DC to 6MHz (-3 dB or less, typical3) Subject to change depending on type of oscilloscope used and measurement conditions.
Rise time2 900 ps max. Subject to change depending on type of oscilloscope used.
Rise time1 58 ns max. (typical3) Subject to change depending on type of oscilloscope used and measurement conditions.
Max input voltage2 600V(DC+AC peak) or 424 Vrms Frequency of the AC needs to be less than 100kHz.
1:When a 1/1 attenuation rate is selected.
2:When a 1/10 attenuation rate is selected.
3:Typical (or average) value; not guaranteed.
Bedienungsanleitungen

Suchen Sie mehr Informationen über unsere Mitarbeiter, Technologie oder Lösungen?


Ihr Kontakt zu uns
 
Oben