DC-Quellen/Senken

Auf Grund des Trends hin zu portablen Anwendungen werden Kommunikationsgeräte und Informationsanwendungen immer komplexer und kompakter. Dies wird durch die Entwicklung multifunktioneller LSIs mit Dioden, Kondensatoren und anderen elektronischen Komponenten ermöglicht. Yokogawa ist ein führender Anbieter von innovativen, anwendungsspezifischen Lösungen.

GS Flyer TOP-Merkmale der DC-Quellen/Senken GS820, GS610 und GS200
Drei programmierbare Source Measure Units (SMUs) mit höchster Genauigkeit, Stabilität, Auflösung und Flexibilität.
Mehr Details und Download des Flyers.

Overview:
No, the GS610 and the GS820 cannot be used solely as a DMM to measure only voltage. This is because the Sense terminal cannot be separated from the Output terminal on the instrument. The GS Series uses the Output ...
Overview:
The AC Power Input in all Yokogawa instruments is designed as a 3-pin connection (one of which is a GND pin). In some parts of the world, PCs are sold with AC power cables that are 2-pin. Often times this means the ...
Overview:
Unfortunately, we cannot upgrade a GS200 to add the /MON option. The GS series instruments, which includes the GS610 and GS820, cannot be retrofitted or upgraded with new options after the initial purchase. All ...
Overview:
The following attached document details the typical output noise of the GS200 from DC to 20 MHz.
Overview:
This is a list of command mnemonics which can be used to describe the GS610 program pattern file.○:Setting has changed successfully△:Setting has been received but failed×:Setting has not been ...
Overview:
The GP-IB command of the GS200 shares the same mode as the 7651. It can be swithced to 488.2 mode.
Overview:
It is possible to connect multiple GS units in series/parallel connections to boost the maximum voltage/current, provded the values are within the range of maximum voltage/current of those limiters. To amplify the ...
Overview:
The GS610/GS820 output is insulated from the cover case. Therefore, if you want to amplify the output voltage more than 1 unit (or 1 ch) you must connect the system in series. If you want to increase the output ...
Overview:
The following attached document details the typical output noise of the GS200 from DC to 20 MHz.
Overview:
This is a list of command mnemonics which can be used to describe the GS610 program pattern file.○:Setting has changed successfully△:Setting has been received but failed×:Setting has not been ...
Overview:
The GP-IB command of the GS200 shares the same mode as the 7651. It can be swithced to 488.2 mode.
Overview:
The GS610/GS820 output is insulated from the cover case. Therefore, if you want to amplify the output voltage more than 1 unit (or 1 ch) you must connect the system in series. If you want to increase the output ...
Overview:
Unfortunately, we cannot upgrade a GS200 to add the /MON option. The GS series instruments, which includes the GS610 and GS820, cannot be retrofitted or upgraded with new options after the initial purchase. All ...
Overview:
The AC Power Input in all Yokogawa instruments is designed as a 3-pin connection (one of which is a GND pin). In some parts of the world, PCs are sold with AC power cables that are 2-pin. Often times this means the ...
Overview:
No, the GS610 and the GS820 cannot be used solely as a DMM to measure only voltage. This is because the Sense terminal cannot be separated from the Output terminal on the instrument. The GS Series uses the Output ...
Overview:
It is possible to connect multiple GS units in series/parallel connections to boost the maximum voltage/current, provded the values are within the range of maximum voltage/current of those limiters. To amplify the ...

Suchen Sie mehr Informationen über unsere Mitarbeiter, Technologie oder Lösungen?


Ihr Kontakt zu uns
 
Oben