700939 900 MHz Aktiver FET Tastkopf

Item	Specifications
Frequency bandwidth	DC-900 MHz for probe 1
Attenuation ratio	10 : 1 ±2% when connected to a resistance of 50 ohm ±1% 1
Output offset voltage	±2 mV (±20 mV when converted into input terminal) 1
Input voltage range	10 Vp-p (DC + AC peak should be within ±10 V) 1,2
Nondestructive input voltage range	±40 V (DC + AC peak) 3
Input resistance	About 2.5 Mohm
Input capacity	About 1.8 pF
Total cable length	1.5 m (probe cable) 1 m (power supply cable)
Weight	About 180 g
Ambient operating temperature	5 to 40 °C
Ambient operating humidity	20 to 80% RH (no condensation)
Ambient storage temperaturev	-20 to 60 °C
Ambient storage humidityv	20 to 80% RH (no condensation)
Power supply voltage	±12 V ±1 V (Usable range: 11 to 13 V or -11 to -13 V)
Power supply current	Current of the power supply terminal is less than 125 mA 2
EMC	Emission Complying standard: EN61326 Class A Immunity Complying standard: EN61326 Susceptibility under immunity condition Noise increase ±200 mV 4

1: Reference operation conditions: Ambient temperature 23±5°C; Ambient humidity 55±10%; 30 minutes after the power supply is applied.
2: When power supply voltage is ±12 V.
3: For the relation between frequency bandwidth and input voltage derating see the graph on the right.
4: Testing condition:
Set 20 MHz for the frequency width and 50 ohm for the input coupling of the Oscilloscope.
Terminate the probe tip with 50ohm. Attach a ferrite core (TDK: ZCAT2035-0930A, YOKOGAWA parts number: A1190MN) on each end of the cable.