光スペクトラムアナライザ「AQ6360」を開発・発売

光スペクトラムアナライザ「AQ6360」を開発・発売
~生産ライン向けの性能を備え、小型化を実現~

光スペクトラムアナライザ「AQ6360」

光スペクトラムアナライザ「AQ6360」

横河計測株式会社(本社:東京都武蔵野市 社長:山崎 正晴)は、分散分光方式の光スペクトラムアナライザの新ラインアップとして、1200nmから1650nmの光通信波長帯に対応した、生産ライン向けの光スペクトラムアナライザ「AQ6360」を開発、本日発売しますのでお知らせします。「AQ6360」は、生産ラインでの試験、検査に求められる性能を小型のボディに搭載しており、光通信用半導体レーザや光トランシーバ(送受信機)、光アンプなどの生産ラインでの使用に最適です。

※ 分散分光方式:
広範囲の波長の光を回折格子で分散させ、細い隙間を通らせることで狭い範囲の波長を取り出す分光方式の一種

開発の背景

情報技術の活用が進み、通信ネットワークサービスの拡大が継続するなかで、光通信網や基地局、データセンター向けの光伝送装置やこれらに搭載する光デバイスの需要が増加しています。データセンター間の通信も電気通信から光通信への移行が進んでおり、光トランシーバの需要が急速に拡大しています。

光トランシーバの需要増加を背景に、光トランシーバを生産するお客様からは、生産ラインでの測定ニーズに対応する低価格で使いやすい光スペクトラムアナライザを求める声が高まっています。このたび発売する「AQ6360」は、これらのご要望に応える新製品です。

新製品の特長

  1. 生産ラインでの試験・検査に必要な性能を備え、低価格を実現
    光通信用半導体レーザや光トランシーバ生産時の試験・検査に求められる性能に特化し、既存の高性能機種より価格を約3割低減しました。
    <主な仕様>
    波長分解能:0.1~2nm(ナノメートル)
    測定感度:+20~-80dBm(ディー・ビー・エム:1mWあたりのデシベル)
    ダイナミックレンジ:55dB(デシベル)
  2. 入力する光ファイバの種類に依存しない安定した測定が可能
    入力部内部に光ファイバを使用しない、当社独自のフリースペース構造を採用しました。これにより、シングルモードファイバ、マルチモードファイバのいずれからも光信号を入力することができ、光ファイバの種類に依存しない安定した測定が可能です。
  3. 高速な測定が可能
    現行製品である「AQ6370D」の約2倍のスピードでの測定を実現しました。
  4. 小型で省スペースに貢献
    幅426mm×奥行459mm×高さ177mm、重量約15.5kgの小型化を実現しました。既存製品より高さ、重さともに約2割低減しました。

主な市場

光通信向けレーザ、光トランシーバ、光通信用光アンプなどの生産ラインにおける光スペクトルの測定

光スペクトラムアナライザ分野の当社の取り組み

当社は、2006年に「AQ6370」を市場投入したのを皮切りに、高速測定が可能で高性能な分散分光方式の光スペクトラムアナライザ「AQ6370シリーズ」を拡充してきました。光通信波長、可視光波長、近赤外域、中赤外域など、さまざまな波長に対応した機種を揃え、光関連デバイスや機器の開発において広く活用されています。このたび発売する「AQ6360」は、「AQ6370シリーズ」の使いやすさと信頼性を継承しつつ、生産ラインでの試験、検査に適した性能とし、導入しやすい価格とサイズを実現した製品です。今後も、お客様のニーズを反映した、世界トップクラスのシェアを誇る光スペクトラムアナライザを、研究・開発から生産ラインまでの幅広い用途に向け提案してまいります。

以上

関連製品とソリューション

光スペクトラムアナライザ AQ6360

光通信

光デバイス生産ラインでの試験・検査に最適化された分散分光方式の高速モデル

  • 波長範囲:1200~1650nm
  • 波長確度:±0.02nm
  • 波長分解能設定:0.1~2nm
  • レベル範囲:+20~-80dBm
  • ダイナミックレンジ:55dB(ピーク±0.4nm)

PLEASE READ THIS NOTICE CAREFULLY - IT APPLIES TO ALL PERSONS WHO VIEW THIS WEBPAGE. PLEASE NOTE THAT IT MAY BE ALTERED OR UPDATED. YOU SHOULD READ IT IN FULL EACH TIME YOU VISIT THE SITE. ACCESS TO THE MATERIALS CONTAINED IN THIS SECTION OF THE WEBSITE (THE "MICROSITE") MAY BE RESTRICTED UNDER SECURITIES LAWS IN CERTAIN JURISDICTIONS. THIS NOTICE REQUIRES YOU TO CONFIRM CERTAIN MATTERS (INCLUDING THAT YOU ARE NOT RESIDENT IN SUCH A JURISDICTION) BEFORE YOU MAY OBTAIN ACCESS TO THE INFORMATION ON THE WEBSITE.

Disclaimer

THESE MATERIALS ARE NOT DIRECTED AT OR TO BE ACCESSED BY PERSONS LOCATED IN ANY JURISDICTION WHERE THE RELEVANT ACTION WOULD CONSTITUTE A VIOLATION OF THE RELEVANT LAWS AND REGULATIONS OF THAT JURISDICTION OR WOULD RESULT IN A REQUIREMENT TO COMPLY WITH ANY GOVERNMENTAL OR OTHER CONSENT OR ANY REGISTRATION, FILING OR OTHER FORMALITY WHICH YOKOGAWA REGARDS AS UNDULY ONEROUS (A "RESTRICTED JURISDICTION").

ELECTRONIC VERSIONS OF THE MATERIALS YOU ARE SEEKING TO ACCESS ARE BEING MADE AVAILABLE ON THIS WEBSITE BY YOKOGAWA IN GOOD FAITH, FOR INFORMATION PURPOSES ONLY AND SUBJECT TO THE TERMS AND CONDITIONS SET OUT BELOW.

Basis of Access

The information contained on this Microsite is in respect of the Acquisition and does not constitute an offer to sell or otherwise dispose of or an invitation or solicitation of any offer to purchase or subscribe for any securities pursuant to the possible transaction or otherwise in any jurisdiction in which such offer or solicitation is unlawful.

The information contained on this Microsite speaks only at the date of the relevant document or announcement reproduced on this Microsite, and Yokogawa has, and accepts, no responsibility or duty to update any such information, document or announcement and reserves the right to add to, remove or amend any information reproduced on this Microsite at any time.

In relation to any document, announcement or information contained on the Microsite, the only responsibility accepted by the directors of Yokogawa is for the correctness and fairness of its reproduction or presentation unless a responsibility statement in any relevant document expressly provides otherwise.

Neither the directors of Yokogawa, nor any of its affiliated companies, have reviewed, and no such person is or shall be responsible for or accepts any liability in respect of any information contained on any other website that may be linked to this Microsite by a third party.

Overseas Persons

Viewing the materials you seek to access may be unlawful if you are resident in a Restricted Jurisdiction. In certain jurisdictions, including Restricted Jurisdictions, only certain categories of person may be allowed to view such materials.

Any person who wishes to view these materials must first satisfy themselves that they are not subject to any local requirements that prohibit or restrict them from doing so. Any failure to comply with restrictions may constitute a violation of the securities laws of any such jurisdiction.

If you are not permitted to view materials on this Microsite please exit this Microsite. Should you be in any doubt about whether you are permitted to view materials on this Microsite, you should not access the Microsite and should take legal advice.

Copies of the contents of the following pages (including documents posted thereon) are not being, and must not be, released or otherwise forwarded, distributed or sent, in whole or in part, in or into a Restricted Jurisdiction and persons receiving such documents (including custodians, nominees and trustees) must not distribute or send them in, into or from a Restricted Jurisdiction.

The Microsite contains information that has been prepared for the purposes of complying with English law and the City Code on Takeovers and Mergers (the "Code") and the information disclosed may not be the same as that which would have been disclosed if this information had been prepared in accordance with the laws and regulations of any jurisdiction outside of England and Wales.

Forward-Looking Statements

The materials on this part of the website, including information included or incorporated by reference, may contain certain forward-looking statements with respect to the financial condition, results of operations and business of Yokogawa. These statements are based on the current expectation of the management of Yokogawa and are naturally subject to uncertainty and changes in circumstances. These forward-looking statements may be identified by words such as "will", "may", "should", "could", "would", "can", "believes", "intends", "expects", "indicates", "anticipates" or similar words or terms or by discussions of, inter alia, strategies, goals or plans.

By their nature, forward-looking statements involve risk and uncertainty because they relate to events and depend on circumstances that may or may not occur in the future. There are several factors which could cause actual results to differ materially from those expressed or implied in forward-looking statements. Among the factors that could cause actual results to differ materially from those described in the forward-looking statements are changes in the global, political, economic, business, competitive, market and regulatory forces, future exchange and interest rates, changes in tax rates and future business combinations or dispositions. Due to such uncertainties, Yokogawa cannot give any assurance that any forward-looking statement will prove to be correct in the future. Yokogawa does not undertake any obligation to update or publicly revise forward-looking statements (whether as a result of new information, future events or otherwise), except to the extent required by applicable law or regulation. You are therefore cautioned not to place undue reliance on these forward-looking statements.

Forward-Looking Statements

This notice shall be governed by and interpreted in accordance with English law.

By clicking "I understand and accept" below, you hereby acknowledge that you have read and understood the notice set out above, that you are permitted to proceed to the Microsite and agree to be bound by its terms.

By clicking on "Decline" below, you will not be able to proceed to the Microsite.

Precision Making

トップ