Voltage Probes

An oscilloscope is only as good as its probes. Our range includes high voltage, differential, active, low capacitance, and passive types, with ranges to 30kV and frequency bandwidths to 5 GHz.

  • 周波数帯域:DC~50MHz 差動入力電圧範囲:5000Vrms/7000Vp-p
    価格 ¥220,000 (税抜)
  • The 701927 is a 50:1 or 500:1 high voltage (1400V peak) probe with extended bandwidth covering DC to 150MHz, This probe provides a balanced differential input, to be used with oscilloscopes with single-ended inputs (1 MΩ Input Impedance).  This probe works with DLM2000, DLM4000, DL6000, DLM6000, DL9000 and SB5000. This probe is conveniently powered by the Yokogawa Probe Interface.

  • 1400Vpk 1000Vrms-CATIII DC~100MHz帯域
    価格 ¥80,000 (税抜)
  • Differential probe powered by internal battery.

  • Bandwidth: DC to 100 MHz (-3 dB)

  • The PBDH1000 (701924) is a 25Vp Differential Probe powered by the Yokogawa Probe Interface. This probe can be used only with the Yokogawa DLM2000, DL6000, DLM6000, DL9000, and SB5000 series oscilloscope. 

  • The 701922 is a 10:1 Differential Probe rated at 20Vpeak differential voltage input and 60Vpeak Common-Mode input with 200MHz bandwidth (-3dB). This probe is recommended for CAN bus and can be used with virtuallly any oscillscope with an internal 50Ω termination or use the external 50Ω 700976. This probe is powered via a built in pig-tail LEMO lead. This probe can be powered with Yokogawa scope option /P2 or /P4, or an external power supply 700938-3-D or 701934-D. The probe is supplied with one each pinchers, B9852MF black and B9852MG red and a 50cm ground extension.

  • Differential Probe, 12Vp Differential, 30Vp Common-Mode, 500MHz, 10:1, 100kΩ, w/ built-in power cable (LEMO lead)

  • Passive Probe, 1000V(DC+ACpeak) CAT II, 200MHz, 10:1, 10MΩ, 2.5m
    Wide operating temperature range(-40 to 85°C)
    For DLM2000 and DLM4000 series

  • Passive Probe, 600Vp, 500MHz, 10:1, 10MΩ, 1.3m
    Supplied standard with DLM2000/DLM4000.

  • Passive Probe, 600Vp, 200MHz, 10:1, 10MΩ, 1.5m
    Supplied standard with DLM2000/DLM4000.

  • スコープコーダシリーズ非絶縁入力モジュール用
    600Vpk モジュール 701255用 10:1
    価格 ¥15,000 (税抜)
  • Passive Probe, 400Vrms, 500MHz, 10:1, 10MΩ, 1.3m, 'Miniature Passive Probe' w/ accy kit.
    Optional probe for DLM2000/DLM4000/DL6000/DLM6000/DL9000/SB5000 series.
    Can also be ordered as a substitute for the standard probe when ordering DLM2000/DL6000/DLM6000.

  • Passive Probe, 1000Vrms, 400MHz, 100:1, 50MΩ, 1.2m, 'Mini'
    For DL1700, DLM2000, DLM4000, DL/DLM6000,DL9000 and SB5000.
    See also 701945 for 250 MHz version of this same probe.

  • Passive Probe, 1000Vrms, 250MHz, 100:1, 50MΩ, 3.0m, 'Mini' with extra-long 3m lead.  Compatible with DL1700, DLM2000, DLM4000, DL/DLM6000, DL9000 and SB5000. See also 701944 for 400 MHz version of this same probe.

  • 1000Vrms-CATII 10:1 DC~100MHz帯域
    価格 ¥25,000 (税抜)
  • スコープコーダシリーズ絶縁入力モジュール用
    1000Vrms-CATII 10:1
    広温度範囲動作 (-40~85℃) 60MHz帯域 2.5m
    価格 ¥28,000 (税抜)
  • スコープコーダシリーズ絶縁入力モジュール用
    DC~200MHz(-3dB) 減衰比:1/100
    100MΩ/約7pF 1.5m
    価格 ¥28,000 (税抜)
  • The PBL5000 low-capacitance "transmission line" probe (passive) features both 10:1 and 20:1 attenuation.

  • Active Probe, 10Vp, 900MHz, 10:1, 2.5MΩ / 1.8pF, 1.5m, FET Probe w/ LEMO power pig-tail

  • Passive Probe, 400Vrms, 500MHz, 10:1, 10MΩ, 1.2m, 'Mini'
    Typically used with DL1700 and DL7400 as an optional non-standard probe.

  • Passive Probe, 400Vrms, 350MHz, 10:1, 10MΩ, 3.0m, 'Mini'
    Optional probe for use with DL1600/DL1700/DL7400 series, see also 701941.

  • Passive Probe, 600Vp, 200MHz, 1:1 & 10:1 switchable, 1MΩ/10MΩ, 1.5m,
    This is the standard passive probe included with a DL1600.

  • A 400 MHz passive probe designed for the DL1700E series, and DL7400 series SignalExplorers with switchable attenuation ratio of 1/10 and 1/1.

  • Passive Probe, 'PB500', 600Vp, 500MHz, 10:1, 10MΩ, 1.5m
    Supplied standard with DL9000/SB5000.